G0 GPS

$84.95

G0 GPS was designed as a companion GPS for the Elle0 autopilot, and mounts directly on top of it. But you can also use it with any other autopilot that accepts 3.3V TTL level UART GPS and can provide 5V to the GPS.

G0 features a very accurate UBlox MAX-7Q GPS module, large ground plane for good EMI and multi path signal rejection, as well as a high quality 25mm Taoglas ceramic patch antenna.

G0 performs very well as a GPS for fully autonomous aircraft that usually suffer from GPS loss and accuracy fluctuations due to attitude changes.

 

The G0 GPS comes with the following:

  • 1 x G0 GPS main board
  • 4 x Ground plane shield flaps
  • 1 x 4 pin header
  • 1 x 30cm strip of adhesive copper tape, for connecting the shield flaps to the main board

 

The header and shield flaps do not come mounted on the main board for maximum flexibility.

If you order the board with pre-soldering only the 4pin header will be soldered. Let us know if you need the shield flaps soldered to the board as well.

 

We recommend ordering an Elle0 autopilot and an R0 telemetry radio kit together with the G0 GPS when using it for autonomous aircraft.

Click here to be notified by email when G0 GPS becomes available.

Sold Out

More from this collection

  • Visa
  • MasterCard
  • Amex
  • PayPal