Lisa/M & Lisa/MX now available for Pre-Order! June 04 2014

 

 

Hello everyone!

 

Since we receive regular inquiries about the status of Lisa/M and Lisa/MX, we wanted to let you know that as of now, both boards are available for Pre-Order. With their in-stock arrival in the shop estimated very soon. Please check out the product page for up to date information on its availability!

 

For those of you that do not know Lisa/M and Lisa/MX, they are the bigger sisters of Lisa/S. Lisa/M features the STM32F1 ARM microcontroller, whereas Lisa/MX features the STM32F4 ARM microcontroller.

 

The F1 is a very well tested platform while the F4 is new to the Paparazzi framework. However both have great things going for them depending on the project you are working on. If you are looking for stability or speed, you might decide to choose one or the other.

 

Both boards include a 10 DOM IMU as well as a lot of very useful IO.

- With a footprint of 40mm x 24mm ( compared to Lisa/S footprint of 20mm x 20mm )

- The boards include 8 servo outputs

- 3  TTL Serial Interfaces

- 1  SPI interface for expansion.

- 1  I2C Interface for sensor or motor controller connections

- Several analog inputs

- 1  CAN (Control Area Network)

 

This allows you to build a UAV using;  GPS, Infrared (IR) horizon sensors and several kinds of motor controllers that use PWM, I2C or CAN interfaces. You can use standard PPM output RC receivers or the digital output spectrum satellites, It even supports spectrum satellite diversity. And that is just the tip of the iceberg. 

  

For a more detailed description and feature list, please check out the Paparazzi Wiki.

And visit our Lisa/M and Lisa/MX product pages.